SCADAfarm Pumping

SCADAfarm Pumping will save you precious time by not having to drive to your pump shed to stop/start your operation or identify any faults.
 
Pumps spread over a wide geographical area, pumping from a common water main, can be remotely controlled as a single system from one lead pump using this module.
 
You can turn your pumps on and off whenever suits you using your computer, tablet or smartphone, and monitor and log data about your system’s pressures, levels and flows. You can also adjust key parameters such as flow limits, running time and pressure limits.
 
SCADAfarm Pumping will immediately alert you to any faults such as high pressure or power outages so you can minimise down time and get your irrigation system up and running again as fast as possible. Keeping an eye on your flow rate also makes leaks and burst pipes much easier to detect so you don’t waste water or breach your consent conditions.
 
A Remote Terminal Unit (RTU), power supply and modem will be mounted next to your pump’s control panel and will communicate with SCADAfarm software hosted on our cloud-based server. You can then monitor and control your pumps from the SCADAfarm website or the mobile app.
 
Up to four pumps can be controlled per RTU but each one can still operate independently of SCADAfarm if you wish.

...............................................................................................................................................................................................................................................

appstore

© 2016 SCADAfarm. All Rights Reserved.